Digital Video Entrance panels are Laser cut for continuity and are manufactured from 316 Stainless Steel (Marine Grade) Straight grained finish.
They are manufactured in various forms: Standard and with PAC aperture. The panel has two access codes, two camera inputs & one output and AC & DC lock outputs. If there is a requirement the panels can be supplied with DDA requirements; Braille Numbers, User instructions and Yellow button rings.
The Main controllers are supplied in a Sarel IP55 case complete with fused spur, Video card and chassis plate, the Riser controllers are identical except they have no fused spur. If there is a requirement for special locks or Hasp & Clasps these can be fitted during manufacture. The controller has battery back up and leads as standard and has a 1Amp output per landing door (2). There is also an auxiliary 12VDC 3Amp out put if required. All telephone inputs/outputs have snap off connectors to assist maintenance there is also LED reassurance and Line Call Indication.
Strobes and sounders are simply installed by fitting two wires between the Video monitors and the Strobe/Sounder and programming the dill switch in the controller to switch the device on. Video distributors are fitted into the controller case when space is available and in a separate Video distribution controller when no space is available. Back up batteries are also available at time of purchase.
