Digital Entrance panels are Laser cut for continuity and are manufactured from 316 Stainless Steel (Marine Grade) Straight grained finish.
They are manufactured in various forms: Standard and with PAC aperture. The panel has two access codes, two camera inputs & one output and AC & DC lock outputs. If there is a requirement the panels can be supplied with DDA requirements; Braille Numbers, User instructions and Yellow button rings.
The Main controllers are supplied in a Sarel IP55 case complete with fused spur and chassis plate, the Riser controllers are identical except they have no fused spur or main transformer. If there is a requirement for special locks or Hasp & Clasps these can be fitted during manufacture. The controller has battery back up and leads as standard and has a 1Amp output per landing door (2). There is also an auxiliary 12VDC 3Amp output if required. All telephone inputs/outputs have snap off connectors to assist maintenance there is also LED reassurance.
Strobes and sounders are simply installed by fitting two wires between the Telephone Handset and the Strobe/Sounder and programming the dill switch in the controller to switch the device on.
